25.05.2016 09:16:31
|
DGAP-News: Avarone Metals Inc
DGAP-News: Avarone completes initial20 hole work program on its Moab Lithium Brine Project
25.05.2016 / 09:16 The issuer is solely responsible for the content of this announcement.
---------------------------------------------------------------------------
AVARONE COMPLETES INITIAL 20 HOLE WORK PROGRAM ON ITS MOAB LITHIUM BRINE PROJECT
Vancouver, B.C., MAY 25, 2016 - Avarone Metals Inc. (CSE: AVM) (Frankfurt: W2U1; WKN: A14SVX) (the "Company" or "Avarone") is pleased to announce that it has successfully completed an initial subsurface short auger hole program to test brine sediments on its 100% owned Moab lithium project in the Big Smoky Valley, Nevada.
The geological team conducted a sediment-sampling program, which was completed by hand to test for the presence of lithium in the shallow soil system. Sampling was completed utilizing a grid with north-south and east- west lines. A total of 20 samples were collected to a maximum depth of one meter below surface. Sediment horizons encountered were classified as volcanogenic clay and salt-bearing zones, both of which are favorable for the accumulation of lithium.
All samples are shipped to Western Environmental Testing Laboratory in Sparks, Nev., which is a U.S. EPA-accredited independent laboratory. The samples will be analyzed for lithium, potassium and boron using test methods for evaluation of solid waste, physical/chemical methods (SW846). Assay results are expected shortly.
These results, along with historical gravity survey data will be used to develop a detailed exploration plan for the property, which is to include phase 2 Vibracore drilling (up to 50 meters) and, as warranted, leading to our phase 3 deep hole RC drilling.
"We are pleased to have completed our inaugural initial work program at our Moab lithium brine project, located in Nevada near the Tesla Gigafactory. The salt-bearing zones, as well as, the volcanogenic clays encountered at Moab confirm previous observations made by historical USGS surveys as well as those made by Ultra Lithium project which is contiguous with Moab, which is currently drilling within the same enclosed basin," said CEO Marc Levy.
About Lithium in Nevada
Lithium is a scarce and technologically important element produced primarily from brines and pegmatites. Although it is a non-renewable resource, it is used in conjunction with renewable energy technologies and hybrid automobiles, primarily in the form of Li-ion batteries, currently the most widely applied battery technology in many electronic devices. The consumption of lithium carbonate is on the rise and so far global production has kept pace with demand.
Located in the Range Province in southern Nevada, the Big Smoky Valley, which is approximately 3km wide and 14km long, is an internally drained, fault bounded and closed basin. Geological modeling suggests that lithium- rich brines have been transported and deposited in the both the Clayton and Big Smoky valleys since the Pleistocene era. The primary exploration model is to identify and map basins with ground gravity surveys and evaluate the chemistry of salts and sediments therein with RC or rotary-mud drilling. In the later stages of exploration, downhole geophysics and seismic reflection surveys are also utilized to define lithium-bearing aquifers.
The technical content of this news release has been prepared under the supervision of Peter Born, P. Geo., a Qualified Person as defined in National Instrument 43-101, Standards of Disclosure for Mineral Projects.
On behalf of the Board of Directors,
AVARONE METALS INC.
Marc Levy CEO
For more information contact the Company at: Telephone: (604) 669-9788 Facsimile: (604) 669-9768
Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. We seek Safe Harbor.
Contact: #507 - 700 West Pender Street
Vancouver, British Columbia Canada V6C 1G8
Tel: 604-669-9788 ext. 105 Fax: 604-669-9768
CSE: AVM www.avarone.com info@avarone.com
---------------------------------------------------------------------------
25.05.2016 Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG. The issuer is solely responsible for the content of this announcement.
The DGAP Distribution Services include Regulatory Announcements, Financial/Corporate News and Press Releases. Archive at www.dgap.de
---------------------------------------------------------------------------
466423 25.05.2016
DGAP-News: Avarone Metals Inc. / Key word(s): Drilling Result/Interim Report Avarone completes initial20 hole work program on its Moab Lithium Brine Project
25.05.2016 / 09:16 The issuer is solely responsible for the content of this announcement.
---------------------------------------------------------------------------
AVARONE COMPLETES INITIAL 20 HOLE WORK PROGRAM ON ITS MOAB LITHIUM BRINE PROJECT
Vancouver, B.C., MAY 25, 2016 - Avarone Metals Inc. (CSE: AVM) (Frankfurt: W2U1; WKN: A14SVX) (the "Company" or "Avarone") is pleased to announce that it has successfully completed an initial subsurface short auger hole program to test brine sediments on its 100% owned Moab lithium project in the Big Smoky Valley, Nevada.
The geological team conducted a sediment-sampling program, which was completed by hand to test for the presence of lithium in the shallow soil system. Sampling was completed utilizing a grid with north-south and east- west lines. A total of 20 samples were collected to a maximum depth of one meter below surface. Sediment horizons encountered were classified as volcanogenic clay and salt-bearing zones, both of which are favorable for the accumulation of lithium.
All samples are shipped to Western Environmental Testing Laboratory in Sparks, Nev., which is a U.S. EPA-accredited independent laboratory. The samples will be analyzed for lithium, potassium and boron using test methods for evaluation of solid waste, physical/chemical methods (SW846). Assay results are expected shortly.
These results, along with historical gravity survey data will be used to develop a detailed exploration plan for the property, which is to include phase 2 Vibracore drilling (up to 50 meters) and, as warranted, leading to our phase 3 deep hole RC drilling.
"We are pleased to have completed our inaugural initial work program at our Moab lithium brine project, located in Nevada near the Tesla Gigafactory. The salt-bearing zones, as well as, the volcanogenic clays encountered at Moab confirm previous observations made by historical USGS surveys as well as those made by Ultra Lithium project which is contiguous with Moab, which is currently drilling within the same enclosed basin," said CEO Marc Levy.
About Lithium in Nevada
Lithium is a scarce and technologically important element produced primarily from brines and pegmatites. Although it is a non-renewable resource, it is used in conjunction with renewable energy technologies and hybrid automobiles, primarily in the form of Li-ion batteries, currently the most widely applied battery technology in many electronic devices. The consumption of lithium carbonate is on the rise and so far global production has kept pace with demand.
Located in the Range Province in southern Nevada, the Big Smoky Valley, which is approximately 3km wide and 14km long, is an internally drained, fault bounded and closed basin. Geological modeling suggests that lithium- rich brines have been transported and deposited in the both the Clayton and Big Smoky valleys since the Pleistocene era. The primary exploration model is to identify and map basins with ground gravity surveys and evaluate the chemistry of salts and sediments therein with RC or rotary-mud drilling. In the later stages of exploration, downhole geophysics and seismic reflection surveys are also utilized to define lithium-bearing aquifers.
The technical content of this news release has been prepared under the supervision of Peter Born, P. Geo., a Qualified Person as defined in National Instrument 43-101, Standards of Disclosure for Mineral Projects.
On behalf of the Board of Directors,
AVARONE METALS INC.
Marc Levy CEO
For more information contact the Company at: Telephone: (604) 669-9788 Facsimile: (604) 669-9768
Neither the CSE nor its Regulation Services Provider (as that term is defined in the policies of the Canadian Securities Exchange) accepts responsibility for the adequacy or accuracy of this release. No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. We seek Safe Harbor.
Contact: #507 - 700 West Pender Street
Vancouver, British Columbia Canada V6C 1G8
Tel: 604-669-9788 ext. 105 Fax: 604-669-9768
CSE: AVM www.avarone.com info@avarone.com
---------------------------------------------------------------------------
25.05.2016 Dissemination of a Corporate News, transmitted by DGAP - a service of EQS Group AG. The issuer is solely responsible for the content of this announcement.
The DGAP Distribution Services include Regulatory Announcements, Financial/Corporate News and Press Releases. Archive at www.dgap.de
---------------------------------------------------------------------------
466423 25.05.2016
Der finanzen.at Ratgeber für Aktien!
Wenn Sie mehr über das Thema Aktien erfahren wollen, finden Sie in unserem Ratgeber viele interessante Artikel dazu!
Jetzt informieren!
Wenn Sie mehr über das Thema Aktien erfahren wollen, finden Sie in unserem Ratgeber viele interessante Artikel dazu!
Jetzt informieren!
Nachrichten zu Avarone Metals Incmehr Nachrichten
Keine Nachrichten verfügbar. |